NEW!! KANN, Needs at least 56" of available frame and is 76"x 96", never used. Container Sides Constructed, 16 Gauge Cold Rolled Steel (ASTM A-366). Container Floor Constructed, 12 Gauge Steel (ASTM A-569), 100% Welded Seam. Sliding Side Loading Doors (One Per Side) Constructed of 5052-H32  Aluminum, Horizontal Corrugated Formed Ribbing For Strength And Vertical Edges Framed With 6061-T6.25” Aluminum Flat Bar. Loading Height Approximately 24” Above Chassis Frame With Door In Lowest Position. Doors, Adjustable Vertically To A Minimum of 5 Positions. Ends Of Handles Capped With Plastic Snag Resistant Caps. Door Edges, 3/8” UHMW Plastic Strip Which Is A Bearing Surface To Allow The Aluminum Side Door To Slide In Its Track With Little Effort. A Brush Seal To Be Installed To Prevent Any Small Contamination From Getting Between The Door And The Lower Sidewall. Lower Sidewall, 24” And Drop Down (With Tabs To Prevent From Falling Out Of The Container) For Easy Clean-Out.